Universal Sideshields
Universal Sidewear™ ANSI Z87.1-2010/CSA Z-94.3 Compliant
The SAFEMATE® B-22 MHS® joins the B-52+ Aye Mate® and B-26+ Wing Mate® in the SOS line of sideshields. Our complete line of Universal SIDEWEAR® incorporates the patented SAFETYWING® which adds new dimensions for total lateral protection, top-side-bottom. All SOS SideWear® is independent 3rd party tested to ANSI Z87.1-2010/CSA Z-94.3 Compliant.
Ordering Information
- CP-5226 contains 10 pairs of B-52+, 10 pairs of B-26+ in display package
- B-52 PLUS contains 20 pairs of B-52+ in display package
- B-26 PLUS contains 20 pairs of B-26+ in display package
- B-22 PLUS contains 10 pairs of B-22+ in display package
Which Sidewear™ is Right For You?
The following measurements are given as selection guidelines:
| 1.182″ to 1.70″ (30mm to 43mm) | Best fit for: ☑ Small Frames ☑ Medium Frames Large Frames |
 |
| 1.25″ to 2.125″ (32mm to 54mm) | Best fit for: Small Frames ☑ Medium Frames ☑ Large Frames |
 |
Adjustment is Simple
The following measurements are given as selection guidelines:
| Larger Frames | Open Sideshield until slightly smaller than frame size and install. |  |
| Average Frames | Ensure Sideshield is slightly smaller than frame size and install. |  |
| Smaller Frames | Close Sideshield until slightly smaller than frame size and install |  |
Mounting is Easy
Insert LEFT temple through large loop of black mounting band on the inside of the LEFT sideshield.(Fig.1)
Hold frame and sideshield firmly while stretching the band outward and back to fit into the retaining grooves and over the rear tab.(Fig. 2)
Inspect the sideshield alignment to be certain the frame is centered between the top and bottom ribs. Then, repeat these steps for the right side.
The sideshields are now affixed to the frame front and temples will fold without the sideshields moving.
